dmesg - 2013-12-04 02:39
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-34-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #49~precise1-Ubuntu SMP Wed Nov 13 18:05:00 UTC 2013 (Ubuntu 3.8.0-34.49~precise1-generic 3.8.13.12)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8.0-34-generic root=/dev/mapper/sda7_crypt ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e5000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aff60000-0x00000000aff6dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aff6e000-0x00000000affb7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000affb8000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Inspiron 570 /04GJJT, BIOS A06 03/29/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xaff60 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xaff5ffff]
[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafdfffff] page 2M
[ 0.000000] [mem 0xafe00000-0xaff5ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xaff5ffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x35340000-0x36997fff]
[ 0.000000] ACPI: RSDP 00000000000fb2f0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000aff60100 00064 (v01 DELL WN09 20120329 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000aff60290 000F4 (v04 DELL FACP1230 20120329 MSFT 00000097)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 00000000aff60650 05D40 (v02 A785R A785R000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aff6e000 00040
[ 0.000000] ACPI: APIC 00000000aff60390 0007C (v02 DELL APIC1230 20120329 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000aff60410 0003C (v01 DELL OEMMCFG 20120329 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000aff60450 00176 (v01 DELL WN09 20120329 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000aff605d0 00080 (v01 DELL FX09 20120329 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000aff6e040 00072 (v01 DELL OEMB1230 20120329 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000aff6a650 00038 (v01 DELL OEMHPET 20120329 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000aff6a690 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000aff5ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xaff5ffff]
[ 0.000000] NODE_DATA [mem 0xaff5b000-0xaff5ffff]
[ 0.000000] [ffffea0000000000-ffffea0002bfffff] PMD -> [ffff8800aca00000-ffff8800af5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xaff5ffff]
[ 0.000000] On node 0 totalpages: 720619
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11198 pages used for memmap
[ 0.000000] DMA32 zone: 705442 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] e820: [mem 0xb0000000-0xff6fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800afc00000 s84928 r8192 d21568 u262144
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 709351
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-34-generic root=/dev/mapper/sda7_crypt ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a78a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2798024k/2882944k available (7172k kernel code, 468k absent, 84452k reserved, 6071k data, 1016k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 11534336 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2793.009 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.01 BogoMIPS (lpj=11172036)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000040] AppArmor: AppArmor initialized
[ 0.000041] Yama: becoming mindful.
[ 0.000314] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001831] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002541] Mount-cache hash table entries: 256
[ 0.002722] Initializing cgroup subsys cpuacct
[ 0.002724] Initializing cgroup subsys memory
[ 0.002732] Initializing cgroup subsys devices
[ 0.002733] Initializing cgroup subsys freezer
[ 0.002735] Initializing cgroup subsys blkio
[ 0.002736] Initializing cgroup subsys perf_event
[ 0.002739] Initializing cgroup subsys hugetlb
[ 0.002762] tseg: 0000000000
[ 0.002774] CPU: Physical Processor ID: 0
[ 0.002775] CPU: Processor Core ID: 0
[ 0.002776] mce: CPU supports 6 MCE banks
[ 0.002782] LVT offset 0 assigned for vector 0xf9
[ 0.002787] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.002787] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.002787] tlb_flushall_shift: 4
[ 0.002881] Freeing SMP alternatives: 24k freed
[ 0.004219] ACPI: Core revision 20121018
[ 0.013022] ftrace: allocating 29364 entries in 115 pages
[ 0.024823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064442] smpboot: CPU0: AMD Athlon(tm) II X2 240 Processor (fam: 10, model: 06, stepping: 02)
[ 0.170867] Performance Events: AMD PMU driver.
[ 0.170871] ... version: 0
[ 0.170872] ... bit width: 48
[ 0.170873] ... generic registers: 4
[ 0.170874] ... value mask: 0000ffffffffffff
[ 0.170875] ... max period: 00007fffffffffff
[ 0.170875] ... fixed-purpose events: 0
[ 0.170876] ... event mask: 000000000000000f
[ 0.171891] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.171958] smpboot: Booting Node 0, Processors #1
[ 0.184983] Brought up 2 CPUs
[ 0.184985] smpboot: Total of 2 processors activated (11172.03 BogoMIPS)
[ 0.185725] devtmpfs: initialized
[ 0.186943] EVM: security.selinux
[ 0.186944] EVM: security.SMACK64
[ 0.186945] EVM: security.capability
[ 0.187038] PM: Registering ACPI NVS region [mem 0xaff6e000-0xaffb7fff] (303104 bytes)
[ 0.187885] regulator-dummy: no parameters
[ 0.187929] NET: Registered protocol family 16
[ 0.188018] node 0 link 0: io port [1000, ffffff]
[ 0.188020] TOM: 00000000c0000000 aka 3072M
[ 0.188022] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.188024] node 0 link 0: mmio [a0000, bffff]
[ 0.188027] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.188028] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.188030] node 0 link 0: mmio [f0000000, fe8fffff]
[ 0.188032] node 0 link 0: mmio [fe900000, feafffff]
[ 0.188033] node 0 link 0: mmio [feb00000, ffefffff]
[ 0.188035] bus: [bus 00-07] on node 0 link 0
[ 0.188036] bus: 00 [io 0x0000-0xffff]
[ 0.188038] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.188039] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.188040] bus: 00 [mem 0xf0000000-0xfcffffffff]
[ 0.188107] ACPI: bus type pci registered
[ 0.188153] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188155] PCI: not using MMCONFIG
[ 0.188156] PCI: Using configuration type 1 for base access
[ 0.188157] PCI: Using configuration type 1 for extended access
[ 0.188916] bio: create slab at 0
[ 0.189114] ACPI: Added _OSI(Module Device)
[ 0.189117] ACPI: Added _OSI(Processor Device)
[ 0.189118] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189119] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.189736] ACPI: EC: Look up EC in DSDT
[ 0.190569] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.192684] ACPI: Interpreter enabled
[ 0.192687] ACPI: (supports S0 S3 S4 S5)
[ 0.192701] ACPI: Using IOAPIC for interrupt routing
[ 0.192726] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.193287] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.203808] ACPI: No dock devices found.
[ 0.203813] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.203879] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.203881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.204125] PCI host bridge to bus 0000:00
[ 0.204129] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.204131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.204133] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.204134] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.204136] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.204138] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff]
[ 0.204140] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.204150] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.204195] pci 0000:00:01.0: [1028:9602] type 01 class 0x060400
[ 0.204235] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.204265] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.204305] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.204323] pci 0000:00:11.0: reg 10: [io 0xd000-0xd007]
[ 0.204332] pci 0000:00:11.0: reg 14: [io 0xc000-0xc003]
[ 0.204342] pci 0000:00:11.0: reg 18: [io 0xb000-0xb007]
[ 0.204351] pci 0000:00:11.0: reg 1c: [io 0xa000-0xa003]
[ 0.204360] pci 0000:00:11.0: reg 20: [io 0x9000-0x900f]
[ 0.204369] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
[ 0.204425] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.204438] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
[ 0.204500] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.204513] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
[ 0.204581] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.204599] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
[ 0.204679] pci 0000:00:12.2: supports D1 D2
[ 0.204680] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.204705] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.204718] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
[ 0.204780] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.204793] pci 0000:00:13.1: reg 10: [mem 0xfe8f7000-0xfe8f7fff]
[ 0.204861] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.204879] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
[ 0.204961] pci 0000:00:13.2: supports D1 D2
[ 0.204963] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.204989] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.205086] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.205107] pci 0000:00:14.2: reg 10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
[ 0.205171] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.205185] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.205259] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.205303] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.205320] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.205331] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.205343] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.205358] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.205398] pci 0000:01:05.0: [1002:9710] type 00 class 0x030000
[ 0.205405] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.205409] pci 0000:01:05.0: reg 14: [io 0xe000-0xe0ff]
[ 0.205413] pci 0000:01:05.0: reg 18: [mem 0xfeaf0000-0xfeafffff]
[ 0.205422] pci 0000:01:05.0: reg 24: [mem 0xfe900000-0xfe9fffff]
[ 0.205437] pci 0000:01:05.0: supports D1 D2
[ 0.205446] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.205453] pci 0000:01:05.1: reg 10: [mem 0xfeae8000-0xfeaebfff]
[ 0.205479] pci 0000:01:05.1: supports D1 D2
[ 0.205519] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.205523] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.205525] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.205528] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.205565] pci 0000:02:00.0: [14e4:1691] type 00 class 0x020000
[ 0.205582] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.205670] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.212971] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.212979] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.213052] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.213061] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.213063] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.213067] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.213068] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.213070] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode)
[ 0.213072] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.213099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.213161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.213215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.213242] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.213243] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.213930] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 *14 15)
[ 0.213962] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15)
[ 0.213990] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.214017] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.214044] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.214072] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.214099] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 *15)
[ 0.214126] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.214234] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.214236] vgaarb: loaded
[ 0.214237] vgaarb: bridge control possible 0000:01:05.0
[ 0.214394] SCSI subsystem initialized
[ 0.214395] ACPI: bus type scsi registered
[ 0.214463] libata version 3.00 loaded.
[ 0.214480] ACPI: bus type usb registered
[ 0.214496] usbcore: registered new interface driver usbfs
[ 0.214503] usbcore: registered new interface driver hub
[ 0.214552] usbcore: registered new device driver usb
[ 0.214683] PCI: Using ACPI for IRQ routing
[ 0.223048] PCI: pci_cache_line_size set to 64 bytes
[ 0.223103] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[ 0.223105] e820: reserve RAM buffer [mem 0xaff60000-0xafffffff]
[ 0.223193] NetLabel: Initializing
[ 0.223194] NetLabel: domain hash size = 128
[ 0.223195] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.223203] NetLabel: unlabeled traffic allowed by default
[ 0.223282] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.223286] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.225304] Switching to clocksource hpet
[ 0.230074] AppArmor: AppArmor Filesystem Enabled
[ 0.230103] pnp: PnP ACPI init
[ 0.230117] ACPI: bus type pnp registered
[ 0.230272] system 00:00: [mem 0xb0000000-0xbfffffff] has been reserved
[ 0.230276] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230303] pnp 00:01: [dma 4]
[ 0.230317] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.230345] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.230363] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.230383] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.230413] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.230490] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.230492] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.230495] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230628] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.230630] system 00:07: [io 0x040b] has been reserved
[ 0.230632] system 00:07: [io 0x04d6] has been reserved
[ 0.230634] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.230636] system 00:07: [io 0x0c14] has been reserved
[ 0.230637] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.230639] system 00:07: [io 0x0c52] has been reserved
[ 0.230641] system 00:07: [io 0x0c6c] has been reserved
[ 0.230644] system 00:07: [io 0x0c6f] has been reserved
[ 0.230646] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.230648] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.230650] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.230651] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.230653] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.230655] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.230657] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.230659] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.230661] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.230662] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.230664] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.230667] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.230669] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.230671] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230781] system 00:08: [io 0x0a00-0x0a0f] has been reserved
[ 0.230783] system 00:08: [io 0x0a10-0x0a1f] has been reserved
[ 0.230785] system 00:08: [io 0x0a20-0x0a2f] has been reserved
[ 0.230787] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230838] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.230840] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230994] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.230996] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.230998] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.231000] system 00:0a: [mem 0x00100000-0xafffffff] could not be reserved
[ 0.231002] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.231004] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.231082] pnp: PnP ACPI: found 11 devices
[ 0.231083] ACPI: ACPI bus type pnp unregistered
[ 0.237315] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.237318] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.237321] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.237324] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.237327] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.237329] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.237333] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.237360] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.237361] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.237363] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237365] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.237367] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff]
[ 0.237368] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.237370] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.237372] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[ 0.237374] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.237376] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.237378] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.237379] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.237381] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237383] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.237384] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff]
[ 0.237386] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.237418] NET: Registered protocol family 2
[ 0.237556] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.237736] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.237888] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.237941] TCP: reno registered
[ 0.237948] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.237979] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.238071] NET: Registered protocol family 1
[ 0.238084] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.600770] pci 0000:01:05.0: Boot video device
[ 0.600779] PCI: CLS 64 bytes, default 64
[ 0.600823] Trying to unpack rootfs image as initramfs...
[ 0.948076] Freeing initrd memory: 22880k freed
[ 0.954530] LVT offset 1 assigned for vector 0x400
[ 0.954535] IBS: LVT offset 1 assigned
[ 0.954561] perf: AMD IBS detected (0x0000001f)
[ 0.954727] Initialise module verification
[ 0.954763] audit: initializing netlink socket (disabled)
[ 0.954774] type=2000 audit(1386104591.844:1): initialized
[ 0.980571] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.981983] VFS: Disk quotas dquot_6.5.2
[ 0.982031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.982499] fuse init (API version 7.20)
[ 0.982631] msgmni has been set to 5509
[ 0.983067] Key type asymmetric registered
[ 0.983069] Asymmetric key parser 'x509' registered
[ 0.983096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.983122] io scheduler noop registered
[ 0.983126] io scheduler deadline registered (default)
[ 0.983136] io scheduler cfq registered
[ 0.983303] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X
[ 0.983398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.983418] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.983523] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.983526] ACPI: Power Button [PWRB]
[ 0.983555] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.983557] ACPI: Power Button [PWRF]
[ 0.985227] GHES: HEST is not enabled!
[ 0.986521] Linux agpgart interface v0.103
[ 0.987519] brd: module loaded
[ 0.988233] loop: module loaded
[ 0.988600] libphy: Fixed MDIO Bus: probed
[ 0.988654] tun: Universal TUN/TAP device driver, 1.6
[ 0.988655] tun: (C) 1999-2004 Max Krasnyansky
[ 0.988726] PPP generic driver version 2.4.2
[ 0.988756] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.988757] ehci-pci: EHCI PCI platform driver
[ 0.988790] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.988795] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.988801] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.988812] ehci-pci 0000:00:12.2: debug port 1
[ 0.988847] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
[ 1.000038] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.000074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.000076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000078] usb usb1: Product: EHCI Host Controller
[ 1.000080] usb usb1: Manufacturer: Linux 3.8.0-34-generic ehci_hcd
[ 1.000081] usb usb1: SerialNumber: 0000:00:12.2
[ 1.000199] hub 1-0:1.0: USB hub found
[ 1.000202] hub 1-0:1.0: 6 ports detected
[ 1.000416] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.000422] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.000425] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.000438] ehci-pci 0000:00:13.2: debug port 1
[ 1.000475] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
[ 1.012017] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.012046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.012048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.012050] usb usb2: Product: EHCI Host Controller
[ 1.012051] usb usb2: Manufacturer: Linux 3.8.0-34-generic ehci_hcd
[ 1.012053] usb usb2: SerialNumber: 0000:00:13.2
[ 1.012171] hub 2-0:1.0: USB hub found
[ 1.012174] hub 2-0:1.0: 6 ports detected
[ 1.012343] ehci-platform: EHCI generic platform driver
[ 1.012356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.012427] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.012438] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.012472] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
[ 1.071911] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.071915] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.071917] usb usb3: Product: OHCI Host Controller
[ 1.071918] usb usb3: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.071920] usb usb3: SerialNumber: 0000:00:12.0
[ 1.072087] hub 3-0:1.0: USB hub found
[ 1.072094] hub 3-0:1.0: 3 ports detected
[ 1.072255] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.072263] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.072280] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
[ 1.131808] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.131812] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.131813] usb usb4: Product: OHCI Host Controller
[ 1.131815] usb usb4: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.131816] usb usb4: SerialNumber: 0000:00:12.1
[ 1.131947] hub 4-0:1.0: USB hub found
[ 1.131953] hub 4-0:1.0: 3 ports detected
[ 1.132102] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.132107] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.132134] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
[ 1.191704] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.191708] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.191709] usb usb5: Product: OHCI Host Controller
[ 1.191711] usb usb5: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.191712] usb usb5: SerialNumber: 0000:00:13.0
[ 1.191849] hub 5-0:1.0: USB hub found
[ 1.191855] hub 5-0:1.0: 3 ports detected
[ 1.191999] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.192004] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.192023] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f7000
[ 1.251607] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.251610] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.251612] usb usb6: Product: OHCI Host Controller
[ 1.251614] usb usb6: Manufacturer: Linux 3.8.0-34-generic ohci_hcd
[ 1.251615] usb usb6: SerialNumber: 0000:00:13.1
[ 1.251759] hub 6-0:1.0: USB hub found
[ 1.251765] hub 6-0:1.0: 3 ports detected
[ 1.251874] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.251947] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.252329] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.252334] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.252440] mousedev: PS/2 mouse device common for all mice
[ 1.252536] rtc_cmos 00:02: RTC can wake from S4
[ 1.252665] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.252689] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.252759] device-mapper: uevent: version 1.0.3
[ 1.252833] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.252839] cpuidle: using governor ladder
[ 1.252841] cpuidle: using governor menu
[ 1.252844] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.252845] EFI Variables Facility v0.08 2004-May-17
[ 1.253051] ashmem: initialized
[ 1.253159] TCP: cubic registered
[ 1.253237] NET: Registered protocol family 10
[ 1.253372] NET: Registered protocol family 17
[ 1.253379] Key type dns_resolver registered
[ 1.253593] Loading module verification certificates
[ 1.254495] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 253c4f779a04eefe395aecbd137448018b69410b'
[ 1.254505] registered taskstats version 1
[ 1.256529] Key type trusted registered
[ 1.258036] Key type encrypted registered
[ 1.259715] rtc_cmos 00:02: setting system clock to 2013-12-03 21:03:12 UTC (1386104592)
[ 1.259760] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 1.260653] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.261000] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.261002] EDD information not available.
[ 1.262393] Freeing unused kernel memory: 1016k freed
[ 1.262623] Write protecting the kernel read-only data: 12288k
[ 1.265328] Freeing unused kernel memory: 1008k freed
[ 1.268221] Freeing unused kernel memory: 1008k freed
[ 1.289522] udevd[99]: starting version 175
[ 1.318819] Disabling lock debugging due to kernel taint
[ 1.318986] pps_core: LinuxPPS API ver. 1 registered
[ 1.318987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 1.319173] PTP clock support registered
[ 1.319887] tg3.c:v3.128 (December 03, 2012)
[ 1.333642] ahci 0000:00:11.0: version 3.0
[ 1.333770] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.333774] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.334841] scsi0 : ahci
[ 1.336145] scsi1 : ahci
[ 1.337925] scsi2 : ahci
[ 1.339113] scsi3 : ahci
[ 1.339183] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
[ 1.339186] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[ 1.339189] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[ 1.339191] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[ 1.342353] libphy: tg3 mdio bus: probed
[ 1.346431] [drm] Initialized drm 1.1.0 20060810
[ 1.350784] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address 84:2b:2b:90:b6:70
[ 1.350788] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[ 1.350791] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.350792] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.375427] [drm] radeon defaulting to kernel modesetting.
[ 1.375430] [drm] radeon kernel modesetting enabled.
[ 1.381306] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1028:0x043B).
[ 1.381322] [drm] register mmio base: 0xFEAF0000
[ 1.381323] [drm] register mmio size: 65536
[ 1.381868] ATOM BIOS: B43106
[ 1.381892] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.381895] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.382230] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.382235] [drm] RAM width 32bits DDR
[ 1.384244] [TTM] Zone kernel: Available graphics memory: 1411980 kiB
[ 1.384247] [TTM] Initializing pool allocator
[ 1.384250] [TTM] Initializing DMA pool allocator
[ 1.384268] [drm] radeon: 256M of VRAM memory ready
[ 1.384270] [drm] radeon: 512M of GTT memory ready.
[ 1.384287] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.385238] [drm] Loading RS780 Microcode
[ 1.404289] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.404383] radeon 0000:01:05.0: WB enabled
[ 1.404386] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800366e9c00
[ 1.404388] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800366e9c0c
[ 1.404391] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.404391] [drm] Driver supports precise vblank timestamp query.
[ 1.404406] [drm] radeon: irq initialized.
[ 1.404637] radeon 0000:01:05.0: setting latency timer to 64
[ 1.436265] [drm] ring test on 0 succeeded in 1 usecs
[ 1.436322] [drm] ring test on 3 succeeded in 1 usecs
[ 1.436418] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.436430] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.436583] [drm] Radeon Display Connectors
[ 1.436584] [drm] Connector 0:
[ 1.436585] [drm] VGA-1
[ 1.436587] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.436588] [drm] Encoders:
[ 1.436589] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.436590] [drm] Connector 1:
[ 1.436591] [drm] HDMI-A-1
[ 1.436592] [drm] HPD1
[ 1.436593] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 1.436594] [drm] Encoders:
[ 1.436595] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 1.436615] [drm] radeon: power management initialized
[ 1.512857] [drm] fb mappable at 0xD0142000
[ 1.512860] [drm] vram apper at 0xD0000000
[ 1.512861] [drm] size 4325376
[ 1.512862] [drm] fb depth is 24
[ 1.512862] [drm] pitch is 5632
[ 1.512957] fbcon: radeondrmfb (fb0) is primary device
[ 1.544003] Console: switching to colour frame buffer device 170x48
[ 1.552855] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 1.552856] radeon 0000:01:05.0: registered panic notifier
[ 1.552925] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0 on minor 0
[ 1.626965] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 1.658943] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.658979] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.759681] usb 1-3: New USB device found, idVendor=054c, idProduct=06a9
[ 1.759685] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.759688] usb 1-3: Product: WALKMAN
[ 1.759689] usb 1-3: Manufacturer: Sony
[ 1.759691] usb 1-3: SerialNumber: 10FF46E5492672
[ 1.826618] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.827734] ata1.00: ATA-8: WDC WD5000AAKS-75V0A0, 05.01D05, max UDMA/133
[ 1.827738] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.828905] ata1.00: configured for UDMA/133
[ 1.829103] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-7 05.0 PQ: 0 ANSI: 5
[ 1.829317] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.829347] sd 0:0:0:0: [sda] Write Protect is off
[ 1.829350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.829363] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829527] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.830626] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.831783] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653H, D400, max UDMA/100
[ 1.833669] ata2.00: configured for UDMA/100
[ 1.835131] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653H D400 PQ: 0 ANSI: 5
[ 1.838802] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.838807] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.838930] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.839002] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.878502] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.879014] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.950406] tsc: Refined TSC clocksource calibration: 2792.999 MHz
[ 1.950412] Switching to clocksource tsc
[ 2.020741] Initializing USB Mass Storage driver...
[ 2.020850] scsi4 : usb-storage 1-3:1.0
[ 2.020914] usbcore: registered new interface driver usb-storage
[ 2.020915] USB Mass Storage support registered.
[ 2.130086] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.263877] usb 2-2: New USB device found, idVendor=058f, idProduct=6362
[ 2.263881] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.263884] usb 2-2: Product: Mass Storage Device
[ 2.263885] usb 2-2: Manufacturer: Generic
[ 2.263887] usb 2-2: SerialNumber: 058F63626420
[ 2.264231] scsi5 : usb-storage 2-2:1.0
[ 2.525391] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[ 2.692117] usb 4-1: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
[ 2.692121] usb 4-1: config 1 interface 0 altsetting 0 endpoint 0x82 has an invalid bInterval 0, changing to 32
[ 2.700102] usb 4-1: New USB device found, idVendor=1784, idProduct=0008
[ 2.700107] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.700109] usb 4-1: Product: eHome Infrared Transceiver
[ 2.700111] usb 4-1: Manufacturer: Topseed Technology Corp.
[ 2.700112] usb 4-1: SerialNumber: TS000Fvl
[ 3.017211] scsi 4:0:0:0: Direct-Access SONY WALKMAN 1.00 PQ: 0 ANSI: 2
[ 3.017909] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.220198] usb 3-1: new full-speed USB device number 2 using ohci_hcd
[ 3.260902] scsi 5:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.261521] scsi 5:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.262021] scsi 5:0:0:2: Direct-Access Generic- SM/xD Picture 1.02 PQ: 0 ANSI: 0
[ 3.262646] scsi 5:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 3.263345] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.263621] sd 5:0:0:1: Attached scsi generic sg4 type 0
[ 3.263815] sd 5:0:0:2: Attached scsi generic sg5 type 0
[ 3.264915] sd 5:0:0:3: Attached scsi generic sg6 type 0
[ 3.278475] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 3.279103] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[ 3.282197] sd 5:0:0:2: [sde] Attached SCSI removable disk
[ 3.282807] sd 5:0:0:3: [sdf] Attached SCSI removable disk
[ 3.392889] usb 3-1: New USB device found, idVendor=046d, idProduct=c52e
[ 3.392893] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.392896] usb 3-1: Product: USB Receiver
[ 3.392897] usb 3-1: Manufacturer: Logitech
[ 3.406927] usbcore: registered new interface driver usbhid
[ 3.406930] usbhid: USB HID core driver
[ 3.409382] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 3.409775] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[ 3.410130] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
[ 3.410240] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[ 3.659442] usb 3-2: new low-speed USB device number 3 using ohci_hcd
[ 3.826125] usb 3-2: New USB device found, idVendor=046d, idProduct=c077
[ 3.826129] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.826131] usb 3-2: Product: USB Optical Mouse
[ 3.826133] usb 3-2: Manufacturer: Logitech
[ 3.833318] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4
[ 3.833407] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
[ 4.027163] ready
[ 4.027545] sd 4:0:0:0: [sdb] 7298684 2048-byte logical blocks: (14.9 GB/13.9 GiB)
[ 4.029167] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.029172] sd 4:0:0:0: [sdb] Mode Sense: 3b 00 00 00
[ 4.030791] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.032156] sd 4:0:0:0: [sdb] 7298684 2048-byte logical blocks: (14.9 GB/13.9 GiB)
[ 4.036280] sdb: sdb1
[ 4.036287] sdb: p1 size 17179869180 extends beyond EOD, enabling native capacity
[ 4.037024] sd 4:0:0:0: [sdb] 7298684 2048-byte logical blocks: (14.9 GB/13.9 GiB)
[ 4.040878] sdb: sdb1
[ 4.040883] sdb: p1 size 17179869180 extends beyond EOD, truncated
[ 4.042251] sd 4:0:0:0: [sdb] 7298684 2048-byte logical blocks: (14.9 GB/13.9 GiB)
[ 4.051383] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.555818] bio: create slab at 1
[ 7.737621] bio: create slab at 1
[ 12.919861] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 14.316068] init: ureadahead main process (394) terminated with status 5
[ 15.592380] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 15.988825] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.121154] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 16.256747] udevd[489]: starting version 175
[ 17.604714] lp: driver loaded but no devices found
[ 18.603419] microcode: CPU0: patch_level=0x010000b7
[ 18.653714] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 18.736347] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.766638] MCE: In-kernel MCE decoding enabled.
[ 18.777019] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 18.777071] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 18.792964] microcode: CPU0: new patch_level=0x010000c7
[ 18.792985] microcode: CPU1: patch_level=0x010000b7
[ 18.792998] microcode: CPU1: new patch_level=0x010000c7
[ 18.793070] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 18.878330] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 18.878404] sp5100_tco: PCI Revision ID: 0x3c
[ 18.878424] sp5100_tco: failed to find MMIO address, giving up.
[ 18.891261] EDAC MC: Ver: 3.0.0
[ 18.892652] AMD64 EDAC driver v3.4.0
[ 18.892810] EDAC amd64: DRAM ECC disabled.
[ 18.892814] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 18.892814] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 18.892814] (Note that use of the override may cause unknown side effects.)
[ 19.001466] kvm: Nested Virtualization enabled
[ 19.001489] kvm: Nested Paging enabled
[ 19.879567] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 19.879814] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 19.879868] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 19.879907] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 19.879948] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 19.879989] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 19.880029] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 19.880077] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 19.880286] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 19.907034] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input13
[ 19.919402] Registered IR keymap rc-rc6-mce
[ 19.919538] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0008) as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/rc/rc0/input14
[ 19.919596] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0008) as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/rc/rc0
[ 20.063171] mceusb 4-1:1.0: Registered Topseed Technology Corp. eHome Infrared Transceiver with mce emulator interface version 1
[ 20.063175] mceusb 4-1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[ 20.063224] usbcore: registered new interface driver mceusb
[ 20.153310] type=1400 audit(1386122611.422:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=809 comm="apparmor_parser"
[ 20.153325] type=1400 audit(1386122611.422:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=803 comm="apparmor_parser"
[ 20.153720] type=1400 audit(1386122611.422:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=809 comm="apparmor_parser"
[ 20.153741] type=1400 audit(1386122611.422:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=803 comm="apparmor_parser"
[ 20.153956] type=1400 audit(1386122611.422:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=809 comm="apparmor_parser"
[ 20.153979] type=1400 audit(1386122611.422:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=803 comm="apparmor_parser"
[ 20.164380] IR NEC protocol handler initialized
[ 20.210436] IR RC5(x) protocol handler initialized
[ 20.245377] IR RC6 protocol handler initialized
[ 20.280268] IR JVC protocol handler initialized
[ 20.343965] IR Sony protocol handler initialized
[ 20.443433] IR SANYO protocol handler initialized
[ 20.480533] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input15
[ 20.480601] IR MCE Keyboard/mouse protocol handler initialized
[ 20.508906] lirc_dev: IR Remote Control driver registered, major 248
[ 20.543535] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 20.543538] IR LIRC bridge handler initialized
[ 20.957877] ppdev: user-space parallel port driver
[ 21.463588] type=1400 audit(1386122612.734:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1004 comm="apparmor_parser"
[ 21.464066] type=1400 audit(1386122612.734:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1004 comm="apparmor_parser"
[ 21.608980] init: failsafe main process (969) killed by TERM signal
[ 21.613244] Bluetooth: Core ver 2.16
[ 21.613266] NET: Registered protocol family 31
[ 21.613268] Bluetooth: HCI device and connection manager initialized
[ 21.613276] Bluetooth: HCI socket layer initialized
[ 21.613278] Bluetooth: L2CAP socket layer initialized
[ 21.613282] Bluetooth: SCO socket layer initialized
[ 21.874799] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.874802] Bluetooth: BNEP filters: protocol multicast
[ 21.874811] Bluetooth: BNEP socket layer initialized
[ 21.913318] Bluetooth: RFCOMM TTY layer initialized
[ 21.913331] Bluetooth: RFCOMM socket layer initialized
[ 21.913332] Bluetooth: RFCOMM ver 1.11
[ 23.009465] type=1400 audit(1386122614.282:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1085 comm="apparmor_parser"
[ 23.009896] type=1400 audit(1386122614.282:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1085 comm="apparmor_parser"
[ 25.542543] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 25.552947] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.553160] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.305431] tg3 0000:02:00.0 eth0: Link is down
[ 28.991120] Adding 2928636k swap on /dev/mapper/sda6_crypt. Priority:-1 extents:1 across:2928636k
[ 29.300127] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 29.300131] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 29.300138] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 780.718927] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 780.718933] ata2.00: failed command: IDENTIFY PACKET DEVICE
[ 780.718938] ata2.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 780.718938] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 780.718940] ata2.00: status: { DRDY }
[ 780.718944] ata2: hard resetting link
[ 781.210107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 781.211793] ata2.00: configured for UDMA/100
[ 781.226148] ata2: EH complete
[ 867.813571] UDF-fs: INFO Mounting volume '\xffffffc3\xffffff8e\xffffff8e\xffffffc3\xffffff9e\xffffff9e\xffffffc2\xffffffb1\xffffffb1\xffffffc3\xffffffaa\xffffffaa\xffffffc3\xffffff8c\xffffff8c\xffffffc3\xffffffa2\xffffffa2', timestamp 2008/06/23 00:33 (1ed4)
[ 897.139481] sr 1:0:0:0: [sr0] Unhandled sense code
[ 897.139487] sr 1:0:0:0: [sr0]
[ 897.139488] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 897.139490] sr 1:0:0:0: [sr0]
[ 897.139491] Sense Key : Medium Error [current]
[ 897.139494] sr 1:0:0:0: [sr0]
[ 897.139496] Add. Sense: Unrecovered read error
[ 897.139498] sr 1:0:0:0: [sr0] CDB:
[ 897.139499] Read(10): 28 00 00 00 55 4a 00 00 40 00
[ 897.139505] end_request: I/O error, dev sr0, sector 87336
[ 897.139508] quiet_error: 48 callbacks suppressed
[ 897.139510] Buffer I/O error on device sr0, logical block 21834
[ 897.139513] Buffer I/O error on device sr0, logical block 21835
[ 897.139515] Buffer I/O error on device sr0, logical block 21836
[ 897.139517] Buffer I/O error on device sr0, logical block 21837
[ 897.139518] Buffer I/O error on device sr0, logical block 21838
[ 897.139520] Buffer I/O error on device sr0, logical block 21839
[ 897.139521] Buffer I/O error on device sr0, logical block 21840
[ 897.139523] Buffer I/O error on device sr0, logical block 21841
[ 897.139524] Buffer I/O error on device sr0, logical block 21842
[ 897.139526] Buffer I/O error on device sr0, logical block 21843